Double Glazing Seal Repairs
If the seals of double-glazed windows are damaged, they can cause damp and mould. This can damage the frame and wall surrounding it and affect your health.
Fortunately, resealing is a cheaper way to repair the majority of uPVC window frames than to replace them. A glazier can clean the frame and the glass of the window. They will apply a fresh bead and smooth it.
Water Leaks
Window seals are made to prevent moisture to stay out of your home. However, when they start to break down, it can result in water leaks around your windows. A window that leaks isn't only a nuisance but can cause serious damage to the surrounding structure of your home. It is crucial to spot the issue early and have it fixed by an expert before it gets worse.
The most common cause of your windows that leak isn't in the glass itself, but on the frame and sill. This is the most frequent sign of a leaky seal. This can be caused by damage to the seal caused by weather or age, worn out caulking or even a blocked drain that results in the accumulation of water or ice.
Another indication of a failing window seal is water appearing between the panes of your double glazed windows. This isn't as hazardous as a leak from water, as the water does not travel far enough to reach into your home. However, it does mean that the inert gases that are encased between your windows have escaped out. This will reduce the insulation value of your window.
Condensation between the panes of glass is another sign of a leaky seal. This may be caused by a failed window seal, or it could be due to a damp climate in your home or a problem with the glass. The condensation might not just be irritating but it can cause the growth of mould and mildew within your home, which is very difficult and costly to get rid of.
If you're noticing these indications, it's time to conduct an inspection of your double glazed windows. The repair or replacement of your windows will protect your home against water leaks, reduce the cost of energy and remove drafts. It's a small expense to ensure your family's security and comfort. Contact Thompson Creek Window to discuss your options regarding window seal repair or replacement. Our staff is always ready to assist! We serve homeowners throughout the Mid-Atlantic region.
Condensation
A damaged double-glazing seal could let water in the space that is insulating. This water can cause fogging or misting within the window panes.
If you see condensation in your home, it's time to contact an expert in double glazing repair. The condensation is a sign that the vacuum seal drawn by the factory has been damaged and moisture is getting into the gap between the insulated and non-insulated.
Condensation is caused by a number of causes, but most commonly by faulty sealants, gaskets or insulation in the uPVC frames of the windows. There are several options for double glazing seal repairs However, it is crucial that the new seals are properly measured to ensure the best seal and a snug fit.
Gaskets are generally made of polyurethane, which is a material that can be used to fill in gaps between double-glazed units. They are designed to last for a long time, but they can deteriorate in time as a result of natural wear and wear or exposure to fluctuating temperatures and weather conditions.
As time passes the foam may shrink or crack, which causes a break in the seal, which allows moisture to enter the double-glazed windows. This can cause condensation and a decrease in energy efficiency.
Re-sealing the windows is a way to fix this problem. This is not a sure solution since it will only remove the existing condensation, and not address the underlying problems that are causing the double-glazed windows to leak or form condensate.
Another option is to replace your windows completely and this should be handled by a professional who provides an insurance backed guarantee. This means that in the event that the company fails or is shut down, you'll still be protected by the insurance. It's worth mentioning that the warranty on your replacement windows must be at least 10 years.
Misting
Make sure that the seals on your double-glazing are in good condition as the fall season approaches. Worn-out window seals not only affect the insulative properties of your windows but can also lead to condensation, mold and damp. It is crucial to fix any issues with your double-glazed windows as quickly as you can to avoid further damage and save on energy costs.
Double-glazed windows consist of two panes glass that are joined by a gas-filled interior space. The sealant layer on the outside fills the gap between the uPVC frames and the glass. This is essential to maintain the air-tight seal that keeps cold and warm air from your home, saving you money on your heating bills. These seals are susceptible to damage as time passes due to the weather, aging, or poor installation. The secret ingredient that makes double-glazed windows so effective can begin to lose its effectiveness once this happens.
If left unchecked leaks, damaged seals, or other issues can lead to damp and condensation which can ruin the appearance of your windows but could also affect your health. Damp and mould not only cause damage to your walls, floors and ceilings, but also create allergens and irritants in your home that can cause harm to you and your family's health.
One of the most common problems that can arise with your double glazing is that it can leak between the panes. This happens when moisture is absorbed in the insulated part of your windows. It isn't easy to fix without professional double glazing repair .
DIY solutions to this issue are available, however we recommend against them because they can be messy and damage your windows. These methods involve drilling holes into your glazed unit and using chemicals to remove fog & condensation. This can cause a number complications, including exposure of your windows and units to water damage.
Professional glaziers possess the knowledge, tools and experience needed to safely reseal your uPVC frames and give you lasting results. They can also offer suggestions on how to properly maintain your uPVC window to avoid any future issues.
Draughts
A draught from your window is a sign that the sealant has been damaged and must be replaced or repaired. This will stop the cold air from entering your home, increase efficiency in energy use and lower heating costs, and also increase comfort levels and indoor temperature control.
It is important to know that a few draughts aren't caused by window seals but rather the gap between the bricks' frame. In certain cases it may be possible to repair this by simply filling the gap with silicone caulking. If this doesn't work, you'll require the seal to be professionally resealed.
When the sealant on double-glazed windows begins to fail and allows water to infiltrate. This can lead to damp or even mold. This can have a negative effect on health and cause damage to the property. If you observe any issues with water ingress it is important to address them as soon as possible. If your windows are still covered by a warranty It is worth checking to find out if the company that supplied them will be able to cover the cost.
It is important to determine whether the windows are covered under warranties. Some companies offer lifetime warranties and others offer 10 years. If your double glazing falls under warranty, it is recommended to contact the company that sold them as soon as you can and inform them about any problems you are having. It is best to reach the company in person or by letter and email. This will ensure that everything is recorded and clear.
It is important to note that draughts are often caused by defective hinges rather than the absence of seals that are effective. The hinges are responsible for closing the window sash (the section that you open) but they can also become stiffer as time passes if they're not regularly oiled. This could leave an opening between the sash and the frame and allow cold air to enter. This issue can be resolved by replacing these hinges without impacting window seals.